高压断路器特性测试仪

 高压断路器特性测试仪电话13708956461
使用本产品前，请认真参阅使用说明，以减少不必要的人身及设备意外损害！

Before use our product, please read the instructions carefully to avoid unnecessary personal injury and device damage.

您可以随时向本公司技术服务部电话咨询，也可以联系本公司技术服务部工程师培训及现场试验指导。

You can telephone consulting our Technical service Department at any time; besides, you can also contact our technical engineers for product training and guiding.

在使用仪器前，确定仪器接地。

Before using this apparatus, make sure the device is grounded.

输出电源严禁短路。

Short circuit is forbidden in the output power supply.

任何个人或单位未经本公司允许，请不要打开机壳，否则本公司

将不负责维修。

Please do not open the chassis without our permission, or we won’t be responsible for repairment of the device.

 

 

GK-6F高压开关特性测试仪

GK-6F High voltage switch characteristics tester

一、概述

1. Overview

GK-6F高压开关特性测试仪可用于各种电压等级的真空、六氟化硫、少油、多油等电力系统高压开关的机械特性参数测试与测量。测量数据稳定，抗干扰性强，可在500KV等级及以下电站做实验，接线方便，操作简单，是高压开关检修试验最方便的工具。

GKC-12F High voltage switch characteristics test instrument can be used to test and measure mechanical parameters of vacuum, sulfur hexafluoride, less oil, more oil power system’s high voltage switch and etc. It is the most convenient tool for high voltage switch’s repairment and test for its stable data of measurement, easy wiring and simple operation, which make it possible to carry out experiments in power stations with 500kv grade and below.

1. 仪器可自动识别断口分、合闸状态，并根据参考断口状态提示相对应的合、分操作。

1). The apparatus can automatically identify breaker status of on or off for fracture and operates accordingly with clue.

2. 独立的6断口，可检测并提示断口的连接状态，方便用户检查接线。

2). Independent fracture 12 can test and indicate connection status of fracture so that it is convenient for users to check wiring.

3.机内可存储50组测试结果。

3). The device can store fifty sets of testing results.

4.大屏幕液晶（320×240）LCD显示, 高级灰屏，阳光下不反光不黑屏，图文及汉字菜单

操作提示，人性化菜单式界面，操作简便。

4). Its big screen（320×240）LCD display is an advanced grey screen which does not reflect or black screen in sunshine. Besides, its menu interface with clues of pictures and characters menu operation is rather personal and easy to operate.

5.仪器具有强大的图形分析功能，实现波形和测量处理数据同屏显示，使测试过程更直观。

5). The device has powerful graphical analysis function, which makes it possible to display waveform and measured data simultaneously. Thus testing process is more self-evident.

6.   机内带有延时保护功能，断路器动作后能自动切断线圈电压，很好的保护了断路器和测

试仪器。

6). The device contains delay and protection function, which makes it possible to cutoff coil voltage automatically after circuit breaker operates. Therefore, the circuit breaker and the testing instrument are well protected.

7.  本仪器可进行电动和手动分合测试。

7). The device can be used to carry out electric and manual switch test.

8.  可进行高、低电压实验，自动寻找最低分或合闸电压。

8). The device can be used in experiment of low voltage and high voltage, and seek the minimum voltage or closing voltage automatically.

9.  重合闸试验，可做合分、分合，分合分等参数测量。

9). It can be used in reclosing experiment for parameters measurement of closing-opening, opening-closing and opening-closing-opening.

10. 真空接触器（单线圈）参数测量。

10). Parameter measurement of vacuum contactor (single coil) .

二、技术参数

2. Technical Parameters

1．时间测量：6路

1). Time measurement: fracture 6

            固有分闸（合闸）时间

            Inherent opening (closing) time

            分闸（合闸）相内不同期

            Different period of opening (closing)

            分闸（合闸）相间不同期

            Different period between opening (closing)

            合闸（分闸）弹跳时间（弹跳次数）

            Bouncing time of closing (opening) (bouncing times)

测试范围：0.01ms～10000ms

Measurement range: 0.01ms～10000ms

准确度：1ms～100ms内准确度0.1%±2个字，

Accuracy: 0.1%±2 characters within 1ms～100ms

        大于100ms准确度0.5%±2个字

        0.5%±2 characters over 100ms

速度测量：刚分（刚合）速度

Speed measurement: opening(closing) speed

            指定时间段（行程段或角度段）平均速度

            The average speed for designed period of time (distance or angle range)

测速范围：1mm传感器 0.01～25.00m/s，

0.1mm传感器 0.001～2.50m/s，

0.5°角度传感器0.01～25.00m/s

万能传感器：0.01～10.00m/s

       Speed measurement range: 1mm sensor 0.01～25.00m/s,

                             0.1mm sensor 0.001～2.50m/s

            0.5°angle sensor 0.01～25.00m/s

            Universal sensor：0.01～10.00m/s

3．行程测量：动触头行程（行程）

3. Distance measurement: moving contact travel ( travel)

                     接触行程（开距）

Contact travel ( contact separation)

过冲行程或反程（超程）

                     Overshooting travel or kickback （excess of stroke）

4. 传感器测量范围: 直线位移传感器50mm，分辨率:0.1mm，行程0.1～50mm

                  直线位移传感器300mm，分辨率:0.1mm，行程10～300mm（选配）

                  直线位移传感器500mm，分辨率:1mm，行程10～500mm（选配）

                      360线传感器：360^о,分辨率:0.5^о,行程1mm～1000mm  

4. Sensor measurement range: linear displacement sensor 50mm, resolution: 0.1mm, distance 0.1～50mm  

  linear displacement sensor 300mm, resolution: 0.1mm, distance 10～300mm(optional)  

  linear displacement sensor 500mm, resolution: 1mm, distance 10～500mm(optional)  

  360 line sensor: 360^о,resolution: 0.5^о, distance 1mm～1000mm             

5. 电流测量：显示电流为分（合）闸线圈的最大电流值

    5. current measurement: the maximum value of opening(closing) coil

6．显示屏：320×240液晶屏，对比度可调

    6. Display screen: 320×240 Liquid Crystal Display, contrast adjustable

7．数据存储：可存储100组测量数据

    7. Data storage: a hundred sets of measuring data

8．打印机：高速热敏打印机

    8. Printer: High speed thermal printer

9. 仪器电源 ：AC/DC 220V ± 10%；50Hz ± 2%

    9. Apparatus power supply: AC/DC 220V ± 10%；50Hz ± 2%

10．直流电源：输出电压：25～265V连续可调，输出电流：≤ 15A(短时)

    10. DC power supply: output voltage: 25～265V continuously adjustable, output current:≤ 15A( short time)

11．主机体积：360×250×140mm

    11. Host volume: 360×250×140mm

12．使用环境：  -10℃~+50℃

    12. Operational environment:  -10℃~+50℃

13．相对湿度：≤90%

13. Relative humidity: ≤90%